Userrole - Dell MXL 10GbE Reference Manual

encryption-
type
password
privilege level
role role-name
secret
Defaults The default encryption type for the password option is 0. The default encryption
type for the secret option is 0.
Command CONFIGURATION
Modes
Command
Version 9.5(0.0)
History
Version 8.3.16.1
Usage To view the defined user names, use the show running-config user
Information
command.
Related
password
Commands
show running-config

userrole

Create user roles for the role-based security model.
Syntax
userrole name inherit existing-role-name
To delete a role name, use the no userrole name command. Note that the reserved
role names may not be deleted.
1206
Enter an encryption type for the password that you enter.
• 0 directs the system to store the password as clear text. It
is the default encryption type when using the password
option.
• 7 to indicate that a password encrypted using a DES
hashing algorithm follows. This encryption type is
available with the password option only.
• 5 to indicate that a password encrypted using an MD5
hashing algorithm follows. This encryption type is
available with the secret option only, and is the default
encryption type for this option.
Enter a string up to 32 characters long.
Enter the keyword privilege then a number from zero (0)
to 15.
Enter the keyword role followed by the role name to
associate with that user ID.
Enter the keyword secret then the encryption type.
Introduced the support for roles on the MXL 10/40GbE
Switch.
Introduced on the MXL 10/40GbE Switch IO Module.
— specifies a password for users on terminal lines.
— views the current configuration.
Security