Dell MXL 10GbE Reference Manual page 974

global
interface name
neighbor
router-id
Defaults none
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage The following describes the show ip ospf statistics process-id global
Information
command shown in the following example.
Row Heading
Total
Error
Hello
DDiscr
LSReq
LSUpd
LSAck
TxQ-Len
RxQ-Len
Tx-Mark
Rx-Mark
974
Enter the keyword global to display the packet counts
received on all running OSPF interfaces and packet counts
OSPF neighbors receive and transmit.
(OPTIONAL) Enter the keyword interface then one of the
following interface keywords and slot/port or number
information:
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For Port Channel groups, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
(OPTIONAL) Enter the keyword neighbor then the
neighbor's router-id in dotted decimal format (A.B.C.D.).
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the total number of packets the OSPF process
receives/transmits.
Displays the error count while receiving and transmitting
packets by the OSPF process.
Number of OSPF Hello packets.
Number of database description packets.
Number of link state request packets.
Number of link state update packets.
Number of link state acknowledgement packets.
The transmission queue length.
The reception queue length.
The highest number mark in the transmission queue.
The highest number mark in the reception queue.
Open Shortest Path First (OSPFv2 and OSPFv3)