Neighbor Route-Map - Dell MXL 10GbE Reference Manual

peer-group-
name
Defaults Disabled (that is, the private AS number are not removed).
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version 9.2(0.0)
History
Usage
Applies to external border gateway protocol (EBGP) neighbors only.
Information
If the AS-PATH contains both public and private AS number or contains AS
numbers of an EBGP neighbor, the private AS numbers are not removed.
If a confederation contains private AS numbers in its AS-PATH, the software
removes the private AS numbers only if they follow the confederation numbers in
the AS path.
Private AS numbers are from 64512 to 65535.

neighbor route-map

Apply an established route map to either incoming or outbound routes of a BGP neighbor or peer group.
Syntax
neighbor {ipv6-address | peer-group-name} route-map map-name
{in | out}
To remove the route map, use the no neighbor {ipv6-address | peer-
group-name} route-map map-name {in | out} command.
Parameters
ipv6-address
peer-group-
name
map-name
in
out
Defaults Not configured.
IPv6 Border Gateway Protocol (IPv6 BGP)
Enter the name of the peer group to remove the private AS
numbers.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group.
Enter the name of an established route map. If the Route
map is not configured, the default is deny (to drop all routes).
Enter the keyword in to filter inbound routes.
Enter the keyword out to filter outbound routes.
733