Ntp Trusted-Key - Dell MXL 10GbE Reference Manual

Defaults Not configured.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History

ntp trusted-key

Set a key to authenticate the system to which NTP synchronizes.
Syntax
ntp trusted-key number
To delete the key, use the no ntp trusted-key number command.
Parameters
number
Defaults Not configured.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage The number parameter in the ntp trusted-key command must be the same
Information number as the number parameter in the ntp authentication-key command. If
you change the ntp authentication-key command, you must also change the
ntp trusted-key command.
Related
ntp authentication-key
Commands
ntp authenticate
ntp update-calendar
Configure the system to update the calendar (the hardware clock) with the NTP-derived time.
Syntax
ntp update-calendar [minutes]
To return to default setting, use the no ntp update-calendar command.
System Time and Date
• For VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter a number as the trusted key ID. The range is from 1 to
4294967295.
Introduced on the MXL 10/40GbE Switch IO Module.
— sets an authentication key for NTP.
— enables the NTP authentication parameters you set.
1291