Hello-Time - Dell MXL 10GbE Reference Manual

hello-time

Set the time interval between generation of the spanning tree bridge protocol data units (BPDUs).
Syntax
hello-time seconds
To return to the default value, use the no hello-time command.
Parameters
seconds
Defaults 2 seconds
Command SPANNING TREE
Modes
Command
Version 8.3.16.1
History
Related
forward-delay
Commands
state.
max-age
information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
spanning tree bridge.
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
seconds
Defaults 20 seconds
Command SPANNING TREE
Modes
Command
Version 8.3.16.1
History
Related
forward-delay
Commands
state.
Spanning Tree Protocol (STP)
Enter a number as the time interval between transmission of
BPDUs. The range is from 1 to 10. The default is 2 seconds.
Introduced on the MXL 10/40GbE Switch IO Module.
— changes the wait time before STP transitions to the Forwarding
— changes the wait time before STP refreshes protocol configuration
Enter a number of seconds the system waits before
refreshing configuration information. The range is from 6 to
40. The default is 20 seconds.
Introduced on the MXL 10/40GbE Switch IO Module.
— changes the wait time before STP transitions to the Forwarding
1273