Ip Rip Receive Version - Dell MXL 10GbE Reference Manual

ip rip receive version

To receive specific versions of RIP, set the interface. The RIP version you set on the interface overrides
the version command in ROUTER RIP mode.
Syntax
ip rip receive version [1] [2]
To return to the default, use the no ip rip receive version command.
Parameters
1
2
Defaults RIPv1 and RIPv2
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
Usage If you want the interface to receive both versions of RIP, use the ip rip receive
Information
version 1 2 command.
Related
ip rip send version
Commands
version
ip rip send version
To send a specific version of RIP, set the interface. The version you set on the interface overrides the
version command in ROUTER RIP mode.
Syntax
ip rip send version [1] [2]
To return to the default value, use the no ip rip send version command.
Parameters
1
2
Defaults RIPv1
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
Routing Information Protocol (RIP)
(OPTIONAL) Enter the number 1 for RIP version 1.
(OPTIONAL) Enter the number 2 for RIP version 2.
Introduced on the MXL 10/40GbE Switch IO Module.
— sets the RIP version for sending RIP traffic on an interface.
— sets the RIP version the switch software uses.
(OPTIONAL) Enter the number 1 for RIP version 1. The
default is RIPv1.
(OPTIONAL) Enter the number 2 for RIP version 2.
Introduced on the MXL 10/40GbE Switch IO Module.
1119