Virtual Router Redundancy Protocol (Vrrp) - Dell MXL 10GbE Reference Manual

Virtual Router Redundancy Protocol
(VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell Networking Operating System (OS) for
IPv4 and IPv6.
The following commands apply to both VRRP IPv4 and IPv6:
• advertise-interval
• description
• disable
• hold-time
• preempt
• priority
• show config
• track
• virtual-address
VRRP Ipv6 are in the VRRP for IPv6 Commands
advertise-interval
Set the time interval between VRRP advertisements.
Syntax
advertise-interval {seconds | centisecs centisecs}
To return to the default settings, use the no advertise-interval command.
Parameters
seconds
centisecs
centisecs
Defaults 1 second or 100 centisecs
Command INTERFACE-VRRP
Modes
Command
Version 9.5(0.0)
History

Virtual Router Redundancy Protocol (VRRP)

section.
Enter a number of seconds. The range is from 1 to 255. The
default is 1 second.
Enter the keyword centisecs followed by the number of
centisecs in multiple of 25 centisecs. The range is 25 to 4075
centisecs in multiples of 25 centisecs.
Introduced the support for centisecs on the MXL 10/40GbE
Switch .
60
1345