Ipv6 Ospf Area - Dell MXL 10GbE Reference Manual

ipv6 ospf area

Enable IPv6 OSPF on an interface.
Syntax
ipv6 ospf process id area area id
To disable OSPFv6 routing for an interface, use the no ipv6 ospf process-id
area area-id command.
Parameters
process-id
area area-id
Defaults none
Command INTERFACE
Modes
Command
Version 9.2(0.0)
History
ipv6 ospf authentication
Enable IPv6 OSPF on an interface.
Syntax
ipv6 ospf authentication {null | ipsec spi number {MD5 | SHA1}
[key-encryption-type] key}}
To remove an IPsec authentication policy from an interface, use the no ipv6
ospf authentication spi number command.
To remove null authentication on an interface to allow the interface to inherit the
authentication policy configured for the OSPFv3 area, use the no ipv6 ospf
authentication null command.
Parameters
null
ipsec spi
number
MD5 | SHA1
key-
encryption-
type
key
Open Shortest Path First (OSPFv2 and OSPFv3)
Enter the process identification number.
Specify the OSPF area. The range is from 0 to 65535.
Introduced on the MXL 10/40GbE Switch IO Module.
Causes an authentication policy configured for the area to
not be inherited on the interface.
Security Policy index (SPI) value that identifies an IPsec
security policy. The range is from 256 to 4294967295.
Authentication type: Message Digest 5 (MD5) or Secure Hash
Algorithm 1 (SHA-1).
(OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
Text string used in authentication.
989