Description (For Fcoe Maps) - Dell MXL 10GbE Reference Manual

description (for FCoE maps)

In an FCoE map, add a text description of the FCoE and FC parameters used to transmit storage traffic
over an M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module NPIV proxy gateway in a
converged fabric.
M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module
Syntax
description text
Parameters
text
Defaults None
Command FCOE MAP
Modes
Command
Version 9.3(0.0)
History
Usage
The text description is displayed in show fcoe-map command output.
Information
Related
fcoe-map
Commands
communication between servers and a SAN fabric.
show
FCoE maps.
fabric
Apply an FCoE map on a fabric-facing Fibre Channel (FC) port.
M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module
Syntax
fabric map-name
Parameters
map-name
Defaults None
Command INTERFACE FIBRE_CHANNEL
Modes
Command
Version 9.3(0.0)
History
Usage
An FCoE map is a template used to map FCoE and FC parameters in a converged
Information
fabric. An FCoE map is used to virtualize upstream FC ports on an M I/O
Aggregator and MXL 10/40GbE Switch with the FC Flex IO module NPIV proxy
1406
Enter a maximum of 32 characters.
Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
— creates an FCoE map which contains the parameters used in the
fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
Maximum: 32 alphanumeric characters.
Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
FC Flex IO Modules