Show Backup-Config - Dell N1100-ON Reference Manual

Example
console#rename file1.scr file2.scr

show backup-config

Use the show backup-config command to display the contents of the backup
configuration file.
Syntax
show backup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example shows backup-config data.
console#show backup-config
!Current Configuration:
!System Description "Dell Networking N4032, 6.0.0.0, Linux 2.6.32.9"
!System Software Version 6.0.0.0
!Cut-through mode is configured as disabled
!
configure
slot 1/0 1 ! Dell Networking N4032
stack
member 1 1 ! N4032
exit
interface vlan 1
exit
snmp-server engineid local 800002a203001122334455
exit
Switch Management Commands
1883