Ip Domain-List - Dell MXL 10GbE Reference Manual

Defaults Disabled (that is, the interface does not receive directed broadcast packets)
Command INTERFACE
Modes
Command
Version 8.3.16.1
History

ip domain-list

Configure names to complete unqualified host names.
Syntax
ip domain-list name
To remove the name, use the no ip domain-list name command.
Parameters
name
Defaults Disabled.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage To configure a list of possible domain names, configure the ip domain-list
Information command up to six times.
If you configure both the ip domain-name and ip domain-list commands,
the software tries to resolve the name using the ip domain-name command. If
the name is not resolved, the software goes through the list of names configured
with the ip domain-list command to find a match.
To enable dynamic resolution of hosts, use the following steps:
•
•
To view current bindings, use the show hosts command. To view a DNS-related
configuration, use the show running-config resolve command.
Related ip domain-name
Commands
624
Introduced on the MXL 10/40GbE Switch IO Module.
Enter a domain name to be used to complete unqualified
names (that is, incomplete domain names that cannot be
resolved).
Introduced on the MXL 10/40GbE Switch IO Module.
specify a domain name server with the ip name-server command
enable DNS with the ip domain-lookup command
— specifies a DNS server.
IPv4 Routing