Defaults
•
•
•
Command
ROUTER OSPF
Modes
Command
Version 8.3.16.1
History
Usage
To specify a distance for routes learned from other routing domains, use the
Information
redistribute command.
distribute-list in
Apply a filter to incoming routing updates from OSPF to the routing table.
Syntax
distribute-list prefix-list-name in [interface]
To delete a filter, use the no distribute-list prefix-list-name in
[interface] command.
Parameters
prefix-list-
name
interface
Defaults
Not configured.
Command
ROUTER OSPF
Modes
Command
Version 8.3.16.1
History
934
external dist3 = 110
inter-area dist2 = 110
intra-area dist1 = 110
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the name of a configured prefix list.
(OPTIONAL) Enter one of the following keywords and slot/
port or number information:
•
For Port Channel groups, enter the keywords port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a VLAN, enter the keyword vlan then a number from
1 to 4094.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Introduced on the MXL 10/40GbE Switch IO Module.
Open Shortest Path First (OSPFv2 and OSPFv3)