Ip Scp Topdir - Dell MXL 10GbE Reference Manual

ip scp topdir

Identify a location for files used in secure copy transfer.
Syntax
ip scp topdir directory
To return to the default setting, use the no ip scp topdir command.
Parameters
directory
Defaults The internal flash (flash:) is the default directory.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage To configure the switch as an SCP server, use the ip ssh server command.
Information
Related ip ssh server
Commands
ip ssh authentication-retries
Configure the maximum number of attempts that should be used to authenticate a user.
Syntax
ip ssh authentication-retries 1-10
Parameters
1-10
Defaults 3
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage This command specifies the maximum number of attempts to authenticate a user
Information on an SSH connection with the remote host for password authentication. SSH
disconnects when the number of password failures exceeds authentication-retries.
Security
Enter a directory name.
Introduced on the MXL 10/40GbE Switch IO Module.
— enables the SSH and SCP server on the switch.
Enter the number of maximum retries to authenticate a user.
The range is from 1 to 10. The default is 3.
Introduced on the MXL 10/40GbE Switch IO Module.
1185