Show Fcoe-Map - Dell MXL 10GbE Reference Manual

If a priority group does not use its allocated bandwidth, the unused bandwidth is
made available to other priority groups.
To remove a priority-group configuration in a DCB map, enter the no priority-
group bandwidth pfc command.
By default, equal bandwidth is assigned to each dot1p priority in a priority group.
Use the bandwidth parameter to configure the bandwidth percentage assigned to
a priority group. The sum of the bandwidth allocated to all priority groups in a DCB
map must be 100% of the bandwidth on the link. You must allocate at least 1% of
the total port bandwidth to each priority group.
Related
dcb-map
Commands
the PFC and ETS settings on Ethernet ports.
priority-pgid
map.

show fcoe-map

Display the Fibre Channel and FCoE configuration parameters in FCoE maps.
M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module
Syntax
show fcoe-map [brief | map-name]
Parameters
brief
map-name
Command
•
Modes
•
Command
Version 9.3(0.0)
History
Usage
Use the show fcoe-map command to display the FC and FCoE parameters used
Information
to configure server-facing Ethernet (FCoE) and fabric-facing FC ports in all FCoE
maps on an M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO
module NPIV proxy gateway.
In each FCoE map, the values for the fabric ID and FC-MAP that identify the SAN
fabric to which FC storage traffic is sent, and the FCoE VLAN to be used must be
unique.
An FCoE map is used to identify the SAN fabric to which FCoE storage traffic is sent
and to virtualize M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO
FC Flex IO Modules
– creates a DCB map to configure PFC and ETS parameters and applies
– configures the 802.1p priority traffic in a priority group for a DCB
Displays an overview of currently configured FCoE maps.
Displays the FC and FCoE configuration parameters in a
specified FCoE map. The FCoE map is applied on Ethernet
(FCoE) and FC ports to transmit FC storage traffic to a
specified fabric.
EXEC
EXEC Privilege
Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
1415