Ip Ospf Mtu-Ignore - Dell MXL 10GbE Reference Manual

Usage
You can configure a maximum of six digest keys on an interface. Of the available
Information
six digest keys, the switches select the MD5 key that is common. The remaining
MD5 keys are unused.
To change to a different key on the interface, enable the new key while the old key
is still enabled. The system sends two packets: the first packet authenticated with
the old key and the second packet authenticated with the new key. This process
ensures that the neighbors learn the new key and communication is not disrupted
by keeping the old key enabled.
After the reply is received and the new key is authenticated, delete the old key. Dell
recommends keeping only one key per interface.

ip ospf mtu-ignore

Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.
Syntax
ip ospf mtu-ignore
To return to the default, use the no ip ospf mtu-ignore command.
Defaults Enabled.
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
ip ospf network
Set the network type for the interface.
Syntax
ip ospf network {broadcast | point-to-point}
To return to the default, use the no ip ospf network command.
Parameters
broadcast
point-to-point
942
NOTE: The MD5 secret is stored as plain text in the configuration file with
service password encryption. Write down or otherwise record the key. You
cannot learn the key once it is configured. Use caution when changing the
key.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the keyword broadcast to designate the interface as
part of a broadcast network.
Enter the keywords point-to-point to designate the
interface as part of a point-to-point network.
Open Shortest Path First (OSPFv2 and OSPFv3)