Table of Contents
Advertisement
Command
EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Usage
If you use this command on a local VLT node, all multicast routes from the local
Information
PIM TIB, the entire multicast route table, and all the entries in the data plane are
deleted. The local VLT node sends a request to the peer VLT node to download
multicast routes learned by the peer. Both local and synced routes are removed
from the local VLT node multicast route table. The peer VLT node clears synced
routes from the node.
If you use this command on a peer VLT node, only the synced routes are deleted
from the multicast route table.
debug ip pim
View IP PIM debugging messages.
Syntax
debug ip pim [bsr | events | group | packet [in | out] |
register | state | timer [assert | hello | joinprune |
register]]
To disable PIM debugging, use the no debug ip pim command or use the
undebug all to disable all the debugging commands.
Parameters
bsr
events
group
packet [in | out]
register
state
1014
Introduced on the MXL 10/40GbE Switch IO Module.
(OPTIONAL) Enter the keyword bsr to view PIM Candidate
RP/BSR activities.
(OPTIONAL) Enter the keyword group to view PIM messages
for a specific group.
(OPTIONAL) Enter the keyword group to view PIM messages
for a specific group.
(OPTIONAL) Enter the keyword packet to view PIM packets.
Enter one of the optional parameters:
•
in: to view incoming packets
•
out: to view outgoing packets
(OPTIONAL) Enter the keyword register to view PIM
register address in dotted decimal format (A.B.C.D).
(OPTIONAL) Enter the keyword state to view PIM state
changes.
PIM-Sparse Mode (PIM-SM)
Advertisement
Table of Contents
