Description - Dell MXL 10GbE Reference Manual

description

Configure a short text string describing the VRRP group.
Syntax
description text
To delete a VRRP group description, use the no description command.
Parameters
text
Defaults Not enabled.
Command VRRP
Modes
Command
Version 8.3.16.1
History
disable
Disable a VRRP group.
Syntax
disable
To re-enable a disabled VRRP group, use the no disable command.
Defaults Enabled.
Command VRRP
Modes
Command
Version 8.3.16.1
History
Usage To enable VRRP traffic, assign an IP address to the VRRP group using the
Information virtual-address command and enter no disable.
Related virtual-address
Commands
hold-time
Specify a delay (in seconds) before a switch becomes the MASTER virtual router. By delaying the
initialization of the VRRP MASTER, the new switch can stabilize its routing tables.
Syntax
hold-time {seconds | centisecs centisecs}
To return to the default value, use the no hold-time command.
1348
Enter a text string up to 80 characters long.
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the MXL 10/40GbE Switch IO Module.
— specifies the IP address of the virtual router.
Virtual Router Redundancy Protocol (VRRP)