Dell MXL 10GbE Reference Manual page 648

Field
Destination
Gateway
Dist/Metric
Last Change
Example
Dell#show ip route all
Codes:C- connected, S - static, R - RIP
Locally Originated
type 1
default
Gateway of last resort is not set
----------- ------- ----------- -----------
R
> R 100.10.10.0/24
C
> R 101.10.10.0/24
Dell#
Example
Dell#show ip route summary
(Summary)
Route Source
connected
static
Total
Total 3 active route(s) using 612 bytes
R1_E600i>show ip route static ?
|
<cr>
R1_E600i>show ip route static
648
Description
• N2 = OSPF NSSA external type 2
• E1 = OSPF external type 1
• E2 = OSPF external type 2
• i = IS-IS
• L1 = IS-IS level-1
• L2 = IS-IS level-2
• IA = IS-IS inter-area
• * = candidate default
• > = non-active route
• + = summary routes
Identifies the route's destination IP address
Identifies whether the route is directly connected and on
which interface the route is configured.
Identifies if the route has a specified distance or metric.
Identifies when the route was last changed or configured.
B- BGP, IN - internal BGP, EX - external BGP, LO -
O- OSPF, IA - OSPF inter area N1 - OSPF NSSA external
N2- OSPF NSSA external type 2, E1 - OSPF external type 1
E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1
L2- IS-IS level-2, IA - IS-IS inter area, * - candidate
>- non-active route + - summary route
Destination Gateway
3.0.0.0/8 via 100.10.10.10, So 2/8 120/1
via 101.10.10.10, So 2/9
100.10.10.0/24 Direct, So 2/8
Direct, So 2/8
101.10.10.0/24 Direct, So 2/9
Direct, So 2/9
Active Routes
2
1
3
Pipe through a command
Dist/Metric Last Change
0/0
120/0
0/0
120/0
Non-active Routes
0
0
0
00:07:12
00:08:54
00:08:54
00:09:15
00:09:15
IPv4 Routing