Class-Map - Dell MXL 10GbE Reference Manual

Usage
The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages
Information
given to all eight classes exceeds 100%, the bandwidth percentage automatically
scales down to 100%.
Related qos-policy-output
Commands

class-map

Create/access a class map. Class maps differentiate traffic so that you can apply separate quality-of-
service policies to each class.
Syntax
class-map {match-all | match-any} class-map-name [layer2]
Parameters
match-all
match-any
class-map-
name
layer2
Defaults Layer 3
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage
Packets arriving at the input interface are checked against the match criteria
Information
configured using this command to determine if the packet belongs to that class.
This command accesses CLASS-MAP mode, where the configuration commands
include thematch ip and match mac options.
Related
ip access-list extended
Commands
ip access-list standard
match ip access-group
control list (ACL).
Quality of Service (QoS)
— creates a QoS output policy.
Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords match-all to determine
that the packets must meet all the match criteria in order to
be a member of the class.
Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords match-any to determine
that the packets must meet at least one of the match criteria
in order to be a member of the class.
Enter a name of the class for the class map in a character
format (32 character maximum).
Enter the keyword layer2 to specify a Layer 2 Class Map.
The default is Layer 3.
Introduced on the MXL 10/40GbE Switch IO Module.
— configures an extended IP ACL.
— configures a standard IP ACL.
— configures the match criteria based on the access
1079