Defaults
Disabled.
Command
ROUTER OSPF
Modes
Command
Version 8.3.16.1
History
Usage
To configure all routers and access servers within a stub, use this command.
Information
Related
router ospf
Commands
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type,
use the no auto-cost [reference-bandwidth] command.
Parameters
ref-bw
Defaults
100 megabits per second.
Command
ROUTER OSPF
Modes
Command
Version 8.3.16.1
History
clear ip ospf
Clear all OSPF routing tables.
Syntax
clear ip ospf process-id [process]
Parameters
process-id
process
Open Shortest Path First (OSPFv2 and OSPFv3)
Introduced on the MXL 10/40GbE Switch IO Module.
— enters ROUTER OSPF mode to configure an OSPF instance.
(OPTIONAL) Specify a reference bandwidth in megabits per
second. The range is from 1 to 4294967. The default is 100
megabits per second.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
(OPTIONAL) Enter the keyword process to reset the OSPF
process.
927