Ip Msdp Log-Adjacency-Changes - Dell MXL 10GbE Reference Manual

Parameters
peer address
list name
Defaults Not configured.
Command CONFIGURATION
Modes
Command
Version 9.2(0.0)
History
Usage If a list is not specified, all SA messages received from the default peer are
Information accepted. You can enter multiple default peer commands.

ip msdp log-adjacency-changes

Enable logging of MSDP adjacency changes.
Syntax
ip msdp log-adjacency-changes
To disable logging, use the no ip msdp log-adjacency-changes command.
Defaults Not configured.
Command CONFIGURATION
Modes
Command
Version 9.2(0.0)
History
ip msdp mesh-group
To be a member of a mesh group, configure a peer.
Syntax
ip msdp mesh-group {name} {peer address}
To remove the peer from a mesh group, use the no ip msdp mesh-group
{name} {peer address} command.
Parameters
name
peer address
890
Enter the peer address in a dotted decimal format (A.B.C.D.)
Enter the keywords list name and specify a standard
access list that contains the RP address that should be
treated as the default peer. If no access list is specified, then
all SAs from the peer are accepted.
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter a string of up to 16 characters long for as the mesh
group name.
Enter the peer address in a dotted decimal format (A.B.C.D.).
Multicast Source Discovery Protocol (MSDP)