Table of Contents
Advertisement
adv-router ip-
address
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage
The following describes the show ip ospf process-id database router
Information
command shown in the following example.
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Number of Links
Link connected
to:
966
•
the network's IP address for Type 3 LSAs or Type 5 LSAs
•
the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
•
the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router then the IP
address of an Advertising Router to display only the LSA
information about that router.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the LSA age.
Displays the optional capabilities available on router. The
following options can be found in this item:
•
TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
•
DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
•
E or No E is displayed on whether the originating router
can accept AS External LSAs.
Displays the LSA type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Displays the link state sequence number. This number
detects duplicate or old LSAs.
Displays the Fletcher checksum of an LSA's complete
contents.
Displays the length in bytes of the LSA.
Displays the number of active links to the type of router
(Area Border Router or AS Boundary Router) listed in the
previous line.
Identifies the type of network to which the router is
connected.
Open Shortest Path First (OSPFv2 and OSPFv3)
Advertisement
Table of Contents
