Pfc Commands - Dell MXL 10GbE Reference Manual

------------------------------------------------
0
1
2
3
4
5
6
7
8
Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority#
------------------------------------------------
0
1
2
3
4
5
6
7
8

PFC Commands

The following PFC commands are supported on the FC Flex IO module installed in the MXL 10/40GbE
Switch platform.
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
Syntax
clear pfc counters [port-type slot/port | stack-unit {unit
number | all } all stack-ports all}] | interface {statistics}]
Parameters
port-type
stack-unit unit
number
all stack-ports
all
statistics
Defaults none
FC Flex IO Modules
0,1,2,3,4,5,6,7 100%
- -
- -
- -
- -
- -
- -
- -
- -
Bandwidth TSA
0,1,2,3,4,5,6,7 100%
-
-
-
-
-
-
-
-
Enter the keywords port-type then the slot/port
information.
Enter the keywords stack-unit then the stack-unit number
to be cleared.
Enter the keywords all stack-ports all to clear the
counters on all interfaces.
Enter the keyword statistics to clear only the hardware
PFC counters.
ETS
ETS
-
-
-
-
-
-
-
-
1395