Capture Bgp-Pdu Neighbor (Ipv6) - Dell MXL 10GbE Reference Manual

Command ROUTER BGPV6 ADDRESS FAMILY (conf-router_bgpv6_af)
Modes
Command
Version 9.2(0.0)
History
Usage When you enable soft-reconfiguration for a neighbor and you execute the clear
Information
ip bgp soft in command, the update database stored in the router replays and
updates are reevaluated. With this command, the replay and update process is
triggered only if route-refresh request is not negotiated with the peer. If the
request is negotiated (after execution of clear ip bgp soft in), BGP sends a
route-refresh request to the neighbor and receives all of the peer's updates.
Related clear ip bgp ipv6 unicast soft
Commands resetting the BGP TCP session.

capture bgp-pdu neighbor (ipv6)

Enable capture of an IPv6 BGP neighbor packet.
Syntax
capture bgp-pdu neighbor ipv6-address direction {both | rx |
tx}
To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-
pdu neighbor ipv6-address command.
Parameters
ipv6-address
direction {both
| rx | tx}
Defaults Not configured.
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Related
capture bgp-pdu max-buffer-size
Commands
reflector and the clients.
show capture bgp-pdu neighbor
IPv6 Border Gateway Protocol (IPv6 BGP)
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the IPv6 address of the target BGP neighbor.
Enter the keyword direction and a direction — either rx
for inbound, tx for outbound, or both.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
— activates inbound policies for IPv6 routes without
— enables route reflection between the route
— configures a route reflector and clients.
707