Show Logging Auditlog - Dell MXL 10GbE Reference Manual

defaults none
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage This command displays internal software driver information, which may be useful
Information during troubleshooting switch initialization errors, such as a downed Port-Pipe.

show logging auditlog

Displays an audit log.
Syntax
show logging auditlog
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Example
Dell(conf)#show logging audit
Related clear logging auditlog
Commands
terminal monitor
Configure the system to display messages on the monitor/terminal.
Syntax
terminal monitor
To return to default settings, use the terminal no monitor command.
defaults Disabled.
Simple Network Management Protocol (SNMP) and Syslog
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module..
Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
— clears audit log.
1253