Show Arp Retries - Dell MXL 10GbE Reference Manual

Row Heading
CPU
Example
#show arp summary
(Summary)
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
3
Dell
Related
ip local-proxy-arp
Commands
switchport mode private-vlan

show arp retries

Display the configured number of ARP retries.
Syntax
show arp retries
Command
•
Modes
•
Command
Version 8.3.16.1
History
Related
arp retries
Commands
ARP reply in response to an ARP request.
show hosts
View the host table and DNS configuration.
Syntax
show hosts
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage The following describes the show hosts command in the following example.
Information
638
Description
Lists which CPU the entries are stored on.
0
— enables/disables Layer 3 communication in secondary VLANs.
EXEC
EXEC Privilege
Introduced on MXL 10/40GbE Switch IO Module
— sets the number of ARP retries in case the system does not receive an
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
3
— sets PVLAN mode of the selected port.
CP
IPv4 Routing