Default Logging Monitor - Dell MXL 10GbE Reference Manual

default logging monitor

Return to the default settings for messages logged to the terminal.
Syntax
default logging monitor
Defaults level = 7 or debugging
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related
logging monitor
Commands
terminal monitor
default logging trap
Return to the default settings for logging messages to the Syslog servers.
Syntax
default logging trap
Defaults level = 6 or informational
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related logging trap
Commands
logging
Configure an IP address or host name of a Syslog server where logging messages are sent. You can
configure multiple logging servers of both IPv4 and/or IPv6.
Syntax
logging {ip-address | ipv6–address |hostname} {{udp {port}} |
{tcp {port}}
To disable logging, use the no logging command.
Parameters
ip-address
ipv6-address
1242
Introduced on the MXL 10/40GbE Switch IO Module.
— sets the logging monitor parameters.
— sends system messages to the terminal/monitor.
Introduced on the MXL 10/40GbE Switch IO Module.
— limit messages logged to the Syslog servers based on severity.
Enter the IPv4 address in dotted decimal format.
Enter the IPv6 address in the x:x:x:x::X format.
Simple Network Management Protocol (SNMP) and Syslog