show ip ospf routes
Display routes OSPF calculates and stores in OSPF RIB.
Syntax
show ip ospf process-id routes
Parameters
process-id
Defaults
none
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage
This command is useful in isolating routing problems between the OSPF and the
Information
RTM. For example, if a route is missing from the RTM/FIB but is visible from the
display output of this command, the problem is with downloading the route to the
RTM.
This command has the following limitations:
•
•
Example
Dell#show ip ospf 100 route
Prefix
1.1.1.1
3.3.3.3
13.0.0.0
150.150.150.0
172.30.1.0
Dell#
show ip ospf statistics
Display OSPF statistics.
Syntax
show ip ospf process-id statistics global | [interface name
{neighbor router-id}]
Parameters
process-id
Open Shortest Path First (OSPFv2 and OSPFv3)
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
The display output is sorted by prefixes; intra-area ECMP routes are not
displayed together.
For Type 2 external routes, Type 1 cost is not displayed.
Cost Nexthop
1
0.0.0.0
2
13.0.0.3
1
0.0.0.0
2
13.0.0.3
2
13.0.0.3
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Interface Area
Type
Lo 0
0
Intra-Area
Gi 0/47
1
Intra-Area
Gi 0/47
0
Intra-Area
Gi 0/47
-
External
Gi 0/47
1
Intra-Area
973