Dcbx Commands - Dell MXL 10GbE Reference Manual

DCBX Commands

The following DCBX commands are supported on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch platforms.
advertise dcbx-appln-tlv
On a DCBX port with a manual role, configure the application priority TLVs advertised on the interface to
DCBX peers.
Syntax
advertise dcbx-appln-tlv {fcoe | iscsi}
To remove the application priority TLVs, use the no advertise dcbx-appln-
tlv {fcoe | iscsi} command.
Parameters
{fcoe | iscsi}
Defaults Application priority TLVs are enabled to advertise FCoE and iSCSI.
Command PROTOCOL LLDP
Modes
Command
Version 9.3.0.0
History
Usage To disable TLV transmission, use the no form of the command; for example, no
Information
advertise dcbx-appln-tlv iscsi.
advertise dcbx-tlv
On a DCBX port with a manual role, configure the PFC and ETS TLVs advertised to DCBX peers.
Syntax
advertise dcbx-tlv {ets-conf | ets-reco | pfc} [ets-conf | ets-
reco | pfc] [ets-conf | ets-reco | pfc]
To remove the advertised ETS TLVs, use the no advertise dcbx-tlv command.
Parameters
{ets-conf | ets-
reco | pfc}
1378
Enter the application priority TLVs, where:
• fcoe: enables the advertisement of FCoE in application
priority TLVs.
• iscsi: enables the advertisement of iSCSI in application
priority TLVs.
Introduced on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch
Enter the PFC and ETS TLVs advertised, where:
• ets-conf: enables the advertisement of ETS
configuration TLVs.
• ets-reco: enables the advertisement of ETS
recommend TLVs.
• pfc: enables the advertisement of PFC TLVs.
FC Flex IO Modules