Service-Policy Input - Dell MXL 10GbE Reference Manual

Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage When you apply rate-shape in QoS policy both on the Queue Level and in
Information
Aggregate mode, the queue-based shaping occurs first then aggregate rate
shaping.
Related rate shape
Commands

service-policy input

Apply an input policy map to the selected interface.
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy
input policy-map-name [layer2] command.
Parameters
policy-map-
name
layer2
Defaults Layer 3
Command INTERFACE
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage You can attach a single policy-map to one or more interfaces to specify the
Information service-policy for those interfaces. A policy map attached to an interface can be
modified.
Quality of Service (QoS)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
— shapes traffic output as part of the designated policy.
Enter the name for the policy map in character format (16
characters maximum). You can identify an existing policy
map or name one that does not yet exist.
(OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
NOTE: The service-policy commands are not allowed on a port channel.
The service-policy input policy-map-name command and the
service-class dynamic dot1p command are not allowed simultaneously
on an interface.
1093