Table of Contents
Advertisement
Item
Master addr
Virtual addr(s)
Example (Brief)
Dell>Interface Grp Pri Pre State Master addr Virtual addr(s)
Description----------------------------------------------------
-
TenGig 10/37 1 100 Y Master 200.200.200.200 200.200.200.201
TenGig10/37
200.200.200.203
Description
TenGig10/37
TenGig10/37
200.200.200.207 ... short
desc
Dell>
Usage
The following describes the show vrrp command shown in the following
Information
example.
Item
GigabitEthernet
12/3...
State: master...
Hold Down:...
Adv rcvd:...
1352
Description
•
NA/IF (the interface is not available).
•
MASTER (the interface associated with the MASTER
router).
•
BACKUP (the interface associated with the BACKUP
router).
Displays the IP address of the MASTER router.
Displays the virtual IP addresses of the VRRP routers
associated with the interface.
2 100 Y Master 200.200.200.200 200.200.200.202
3 100 Y Master 1.1.1.1 1.1.1.2
4 100 Y Master 200.200.200.200 200.200.200.206
Description
Displays the Interface, the VRRP group ID, and the network
address. If the interface is not sending VRRP packets, 0.0.0.0
appears as the network address.
Displays the interface's state:
•
Na/If (not available)
•
master (MASTER virtual router)
•
backup (BACKUP virtual router)
the interface's priority and the IP address of the MASTER.
This line displays additional VRRP configuration information:
•
Hold Down displays the hold down timer interval in
seconds.
•
Preempt displays TRUE if preempt is configured and
FALSE if preempt is not configured.
•
AdvInt displays the Advertise Interval in seconds.
This line displays counters for the following:
Virtual Router Redundancy Protocol (VRRP)
Advertisement
Table of Contents
