Show Ipv6 Mld_Host - Dell MXL 10GbE Reference Manual

Dell#
Example
Dell#show ipv6 int tun 1
(tunnel)
Tunnel 1 is up, line protocol is up
Dell#

show ipv6 mld_host

Display the IPv6 MLD host counters.
Syntax
show ipv6 mld_host
Command EXEC
Modes
Command
Version 9.2(0.0)
History
Usage The following describes the show ipv6 mld-host command shown in the
Information
following example.
Field
Valid MLD Packets
Reports
Leaves
MLDv1 queries
688
300::1/64
IPV6 is enabled
Link Local address: fe80::201:e8ff:fea7:497e
Global Unicast address(es):
400::1, subnet is 400::/64 (MANUAL)
Remaining lifetime: infinite
Global Anycast address(es):
Joined Group address(es):
ff02::1
ff02::2
ff02::1:ff00:1
ff02::1:ffa7:497e
ND MTU is 0
ICMP redirects are not sent
DAD is enabled, number of DAD attempts: 3
ND reachable time is 20410 milliseconds
ND base reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 198 to 600 seconds
ND router advertisements live for 1800 seconds
ND advertised hop limit is 64
IPv6 hop limit for originated packets is 64
Introduced on the MXL 10/40GbE Switch IO Module.
Description
The total number of packets received and sent from the last
time the elapsed time was cleared.
The total number of reports (queries and unsolicited reports
generated from joins or leaves) that have been received or
sent.
The number of Multicast leaves that have been sent.
The number of MLDv1 queries that have been received.
IPv6 Basics