Neighbor Advertisement-Interval - Dell MXL 10GbE Reference Manual

Parameters
ipv6-address
peer-group-
name
activate
Defaults Disabled.
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version 9.2(0.0)
History
Usage By default, when a neighbor/peer group configuration is created in the Router BGP
Information context, it is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the new
context, the neighbor/peer group is enabled for AFI/SAFI.
Related address family
Command

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {ipv6-address | peer-group-name} advertisement-
interval seconds
To return to the default value, use the no neighbor {ipv6-address | peer-
group-name} advertisement-interval command.
Parameters
ipv6-address
peer-group-
name
seconds
Defaults
•
766
Enter the IPv6 address in the x:x:x:x::x format.
Identify a peer group by name.
Enter the keyword activate to enable the identified
neighbor or peer group in the new AFI/SAFI.
Introduced on the MXL 10/40GbE Switch IO Module.
— changes the context to SAFI.
Enter the IPv6 address in the x:x:x:x::x format.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a number as the time interval, in seconds, between
BGP advertisements. The range is from 0 to 600 seconds.
The default is 5 seconds for internal BGP peers and 30
seconds for external BGP peers.
seconds = 5 seconds (internal peers)
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
IPv6 Border Gateway Protocol (IPv6 BGP)