Iscsi Priority-Bits - Dell MXL 10GbE Reference Manual

iscsi priority-bits

Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs.
Syntax
iscsi priority-bits priority-bitmap
To remove the configured iSCSI priority, use the no iscsi priority-bits
command.
Parameters
priority-bitmap
Defaults 0x10
Command PROTOCOL LLDP
Modes
Command
Version 9.3.0.0
History
Usage This command is available at the global level only.
Information
show interface dcbx detail
Displays the DCBX configuration on an interface.
Syntax
show interface port-type slot/port dcbx detail
Parameters
port-type
slot/port
Command CONFIGURATION
Modes
Command
Version 9.3.0.0
History
Usage
To clear DCBX frame counters, use the clear dcbx counters interface
Information
stack-unit/port command.
The following describes the show interface dcbx detail command shown in
the following example.
Field
Interface
Port-Role
1382
Enter the priority-bitmap range. The range is from 1 to FF.
Introduced on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch
Enter the port type.
Enter the slot/port number.
Introduced on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch.
Description
Interface type with chassis slot and port number.
Configured the DCBX port role: auto-upstream, auto-
downstream, config-source, or manual.
FC Flex IO Modules