Router Isis - Dell MXL 10GbE Reference Manual

Defaults Refer to Parameters.
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage How a metric value assigned to a redistributed route is advertised depends on how
Information on the configuration of the metric-style command. If the metric-style
command is set for Narrow mode and the metric value in the redistribute
ospf command is set to a number higher than 63, the metric value advertised in
LSPs is 63. If the metric-style command is set for wide mode, the metric value
in the redistribute ospf command is advertised.

router isis

Allows you to enable the IS-IS routing protocol and to specify an IP IS-IS process.
Syntax
router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag
Defaults Not configured.
Command ROUTER ISIS
Modes
Command
Version 9.2(0.0)
History
Usage
Configure a network entity title (the net command) to specify the area address and
Information
the router system ID.
Enable routing on one or more interfaces to establish adjacencies and establish
dynamic routing.
You can configure only one IS-IS routing process to perform Level 2 routing. A
level-1-2 designation performs Level 1 and Level 2 routing at the same time.
828
If you do not specify a map-name, all routes are
redistributed. If you specify a keyword, but fail to list route
map tags, no routes are imported.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Introduced on the MXL 10/40GbE Switch IO Module.
(OPTIONAL) This is a unique name for a routing process. A
null tag is assumed if the tag option is not specified. The tag
name must be unique for all IP router processes for a given
router.
Introduced on the MXL 10/40GbE Switch IO Module.
Intermediate System to Intermediate System (IS-IS)