Bgp Fast-External-Fallover - Dell MXL 10GbE Reference Manual

Related
show ip bgp ipv6 unicast neighbors
Commands
by BGP neighbors.
show ip protocols

bgp fast-external-fallover

Enable the fast external fallover feature, which immediately resets the BGP session if a link to a directly
connected external peer fails.
Syntax
bgp fast-external-fallover
To disable fast external fallover, use the no bgp fast-external-fallover
command.
Defaults Enabled.
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage The bgp fast-external-fallover command appears in the show config
Information command output.
bgp four-octet-as-support
Enable 4-byte support for the BGP process.
Syntax
bgp four-octet-as-support
To disable fast external fallover, use the no bgp four-octet-as-support
command.
Defaults Disabled (supports 2-Byte format)
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage
Routers supporting 4-Byte ASNs advertise that function in the OPEN message. The
Information
behavior of a 4-Byte router is slightly different depending on whether it is speaking
to a 2-Byte router or a 4-Byte router.
702
— displays IPv6 routing information exchanged
— views information on routing protocols.
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the MXL 10/40GbE Switch IO Module.
IPv6 Border Gateway Protocol (IPv6 BGP)