Table of Contents
Advertisement
ip msdp peer
Configure an MSDP peer.
Syntax
ip msdp peer peer address [connect-source] [description] [sa-
limit number]
To remove the MSDP peer, use the no ip msdp peer peer address
[connect-source interface] [description name] [sa-limit number]
command.
Parameters
peer address
connect-
source
interface
description
name
sa-limit
number
Defaults
As described in the Parameters section.
Command
CONFIGURATION
Modes
Command
Version 9.2(0.0)
History
Usage
The connect-source option is used to supply a source IP address for the TCP
Information
connection. When an interface is specified using the connect-source option, the
primary configured address on the interface is used.
If the total number of SA messages received from the peer is already larger than the
limit when this command is applied, those SA messages continue to be accepted.
To enforce the limit in such situation, use the clear ip msdp peer command to
reset the peer.
892
Enter the peer address in a dotted decimal format (A.B.C.D.).
Enter the keywords connect-source then one of the
interfaces and slot/port or number information:
•
For a Fast Ethernet interface, enter the keyword
FastEthernet then the slot/ port information.
•
For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
•
For a VLAN, enter the keyword vlan then a number from
1 to 4094.
(OPTIONAL) Enter the keyword description then a
description name (maximum 80 characters) to designate a
description for the MSDP peer.
(OPTIONAL) Enter the maximum number of SA entries in SA-
cache. The range is from 1 to 500000. The default it
500000.
Introduced on the MXL 10/40GbE Switch IO Module.
Multicast Source Discovery Protocol (MSDP)
Advertisement
Table of Contents
