Ntp Authenticate - Dell MXL 10GbE Reference Manual

sync
Command EXEC Privilege
Modes
Command
Version 8.3.16.1
History

ntp authenticate

Enable authentication of NTP traffic between the switch and the NTP time serving hosts.
Syntax
ntp authenticate
To disable NTP authentication, use the no ntp authentication command.
Defaults Not enabled.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage You also must configure an authentication key for NTP traffic using the ntp
Information
authentication-key command.
Related
ntp authentication-key
Commands
ntp trusted-key
ntp authentication-key
Specify a key for authenticating the NTP server.
Syntax
ntp authentication-key number md5 [0 | 7] key
Parameters
number
md5
System Time and Date
Enter the keyword sync to display information on the NTP
clock synchronization.
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the MXL 10/40GbE Switch IO Module.
— configures the authentication key for NTP traffic.
— configures a key to authenticate.
Specify a number for the authentication key. The range is
from 1 to 4294967295.
This number must be the same as the number parameter
configured in the ntp trusted-key command.
Specify that the authentication key is encrypted using MD5
encryption algorithm.
1287