Clear Lldp Neighbors - Dell MXL 10GbE Reference Manual

clear lldp neighbors

Clear LLDP neighbor information for all interfaces or a specific interface.
Syntax
clear lldp neighbors {interface}
Parameters
interface
Defaults none
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
debug lldp interface
To display timer events, neighbor additions or deletions, and other information about incoming and
outgoing packets, enable LLDP debugging.
Syntax
debug lldp interface {interface | all}{events | packet {brief |
detail} {tx | rx | both}}
To disable debugging, use the no debug lldp interface {interface |
all}{events} {packet {brief | detail} {tx | rx | both}}
command.
Parameters
interface
all
events
1498
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
(OPTIONAL) Enter the keyword all to display information
on all interfaces.
(OPTIONAL) Enter the keyword events to display major
events such as timer events.
PMUX Mode of the MXL 10/40GbE Switch I/O Module