Stack-Unit Provision - Dell MXL 10GbE Reference Manual

stack-unit provision

Preconfigure a logical stacking ID of a switch that joins the stack. This is an optional command that is
executed on the management unit.
Syntax
stack-unit 0–5] provision {MXL-10/40GbE}
Parameters
0–5
MXL-10/40GbE
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related
•
Commands
•
stack-unit renumber
Change the stack member ID of any stack member or a stand-alone unit.
Syntax
stack-unit 0-5 renumber 0-11
Parameters
0-5
Defaults none
Command EXEC Privilege
Modes
Command
Version 8.3.16.1
History
Usage
You can renumber any switch, including the management unit or a stand-alone
Information
unit.
You cannot renumber a unit to a number of an active member in the stack.
1262
Enter a stack member identifier, from 0 to 5, of the switch
that you want to add to the stack.
Enter the model identifier of the switch to be added as a
stack member. This identifier is also referred to as the
provision type.
Introduced on the MXL 10/40GbE Switch IO Module.
reload — reboots the system.
show system — displays the status of all stack members or a specific member.
The first instance of this value is the stack member unit
identifier, from 0 to 5, of the switch that you want add to the
stack.
The second instance of this value is the desired new unit
identifier number.
Introduced on the MXL 10/40GbE Switch IO Module.
Stacking