Vlan Max-Age - Dell MXL 10GbE Reference Manual

vlan max-age

To maintain configuration information before refreshing that information, set the time interval for the
PVST+ bridge.
Syntax
vlan vlan-range max-age seconds
To return to the default, use the no vlan max-age command.
Parameters
vlan vlan-range
max-age
seconds
Defaults 20 seconds
Command CONFIGURATION (conf-pvst)
Modes
Command
Version 8.3.16.1
History
Related
vlan bridge-priority
Commands
vlan forward-delay
forwarding state.
vlan hello-time
show spanning-tree pvst
Per-VLAN Spanning Tree Plus (PVST+)
Enter the keyword vlan then the VLAN numbers. The range
is from 1 to 4094.
Enter the keywords max-age then the time interval, in
seconds, that the system waits before refreshing
configuration information. The range is from 6 to 40
seconds. The default is 20 seconds.
Introduced on the MXL 10/40GbE Switch IO Module.
— sets the bridge-priority value.
— changes the time interval before the system transitions to the
— changes the time interval between BPDUs.
— displays the PVST+ configuration.
1071