Ip Ospf Auth-Change-Wait-Time - Dell MXL 10GbE Reference Manual

ip ospf auth-change-wait-time

OSPF provides a grace period while OSPF changes its interface authentication type. During the grace
period, OSPF sends out packets with new and old authentication scheme until the grace period expires.
Syntax
ip ospf auth-change-wait-time seconds
To return to the default, use the no ip ospf auth-change-wait-time
command.
Parameters
seconds
Defaults zero (0) seconds.
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
ip ospf authentication-key
Enable authentication and set an authentication key on OSPF traffic on an interface.
Syntax
ip ospf authentication-key [encryption-type] key
To delete an authentication key, use the no ip ospf authentication-key
command.
Parameters
encryption-
type
key
Defaults Not configured.
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
Usage All neighboring routers in the same network must use the same password to
Information exchange OSPF information.
Open Shortest Path First (OSPFv2 and OSPFv3)
Enter the seconds. The range is from 0 to 300.
Introduced on the MXL 10/40GbE Switch IO Module.
(OPTIONAL) Enter 7 to encrypt the key.
Enter an eight-character string. Strings longer than eight
characters are truncated.
Introduced on the MXL 10/40GbE Switch IO Module.
939