Logging Trap - Dell MXL 10GbE Reference Manual

Related
logging on
Commands

logging trap

Specify which messages are logged to the Syslog server based the message severity.
Syntax
logging trap [level]
To return to the default values, use the default logging trap command.
To disable logging, use the no logging trap command.
Parameters
level
Defaults 6 or informational
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related
logging
Commands
logging on
logging version
Displays syslog messages in a RFC 3164 or RFC 5424 format.
Syntax
logging version {0|1}
Defaults
0
Command CONFIGURATION
Modes
Version 9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
1250
— enables logging.
Indicate a value from 0 to 7 or enter one of the following
parameters: emergencies, alerts, critical, errors,
warnings, notifications, informational, or
debugging. The default is 6 or informational.
Introduced on the MXL 10/40GbE Switch IO Module.
— enables the logging to another device.
— enables logging.
Simple Network Management Protocol (SNMP) and Syslog