Area Range - Dell MXL 10GbE Reference Manual

area range

Summarize routes matching an address/mask at an area border router (ABR).
Syntax
area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address
mask command.
Parameters
area-id
ip-address
mask
not-advertise
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
Version 8.3.16.1
History
Usage Only the routes within an area are summarized, and that summary is advertised to
Information other areas by the ABR. External routes are not summarized.
Related
area stub
Commands
router ospf
area stub
Configure a stub area, which is an area not connected to other areas.
Syntax
area area-id stub [no-summary]
To delete a stub area, use the no area area-id stub command.
Parameters
area-id
no-summary
926
Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
Specify an IP address in dotted decimal format.
Specify a mask for the destination prefix. Enter the full mask
(for example, 255.255.255.0).
(OPTIONAL) Enter the keywords not-advertise to set the
status to DoNotAdvertise (that is, the Type 3 summary-LSA is
suppressed and the component networks remain hidden
from other areas.)
Introduced on the MXL 10/40GbE Switch IO Module.
— creates a stub area.
— enters ROUTER OSPF mode to configure an OSPF instance.
Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
(OPTIONAL) Enter the keywords no-summary to prevent the
ABR from sending summary Link State Advertisements (LSAs)
into the stub area.
Open Shortest Path First (OSPFv2 and OSPFv3)