Table of Contents
Advertisement
Field
Default domain...
Name/address
lookup...
Name servers
are...
Host
Flags
TTL
Type
Address
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host
-------- -----
ks
4200-1
1230-3
ZZr
Z10-3
Dell#
Related
traceroute
Commands
ip host
IPv4 Routing
Description
Displays the domain name (if configured).
States if DNS is enabled on the system.
•
If DNS is enabled, the Name/Address lookup is domain
service.
•
If DNS is not enabled, the Name/Address lookup is static
mapping
Lists the name servers, if configured.
Displays the host name assigned to the IP address.
Classifies the entry as one of the following:
•
perm — the entry was manually configured and will not
time out
•
temp — the entry was learned and will time out after 72
hours of inactivity.
Also included in the flag is an indication of the validity of the
route:
•
ok — the entry is valid.
•
ex — the entry expired.
•
?? — the entry is suspect.
Displays the amount of time until the entry ages out of the
cache. For dynamically learned entries only.
Displays IP as the type of entry.
Displays the IP addresses assigned to the host.
Flags
TTL
----
(perm, OK) -
(perm, OK) -
(perm, OK) -
(perm, OK) -
(perm, OK) -
— views the DNS resolution.
— configures a host.
Type
Address
----
-------
IP
2.2.2.2
IP
192.68.69.2
IP
192.68.99.2
IP
192.71.18.2
IP
192.71.23.1
639
Advertisement
Table of Contents
