Rapid Spanning Tree Protocol (RSTP)
The Dell Networking Operating System (OS) implementation of rapid spanning tree protocol (RSTP) is
based on the IEEE 802.1w standard spanning-tree protocol. The RSTP algorithm configures connectivity
throughout a bridged local area network (LAN) that is comprised of LANs interconnected by bridges.
bridge-priority
Set the bridge priority for RSTP.
Syntax
bridge-priority priority-value
To return to the default value, use the no bridge-priority command.
Parameters
priority-value
Defaults
32768
Command
CONFIGURATION RSTP (conf-rstp)
Modes
Command
Version 8.3.16.1
History
Related
protocol spanning-tree rstp
Commands
debug spanning-tree rstp
Enable debugging of RSTP and view information on the protocol.
Syntax
debug spanning-tree rstp [all | bpdu interface {in | out} |
events]
To disable debugging, use the no debug spanning-tree rstp command.
Parameters
all
1142
Enter a number as the bridge priority value in increments of
4096. The range is from 0 to 61440. The default is 32768.
Introduced on the MXL 10/40GbE Switch IO Module.
— enters rapid spanning tree mode.
(OPTIONAL) Enter the keyword all to debug all spanning
tree operations.
Rapid Spanning Tree Protocol (RSTP)
46