ip udp-helper udp-port
for all UDP ports or a specified list of UDP ports.
Enhanced Validation of Interface Ranges
This functionality is supported on the MXL platform.
You can avoid specifying spaces between the range of interfaces, separated by commas, that you
configure by using the interface range command. For example, if you enter a list of interface ranges,
such as interface range fo 2/0-1,te 10/0,gi 3/0,fa 0/0, this configuration is considered
valid. The comma-separated list is not required to be separated by spaces in between the ranges. You
can associate multicast MAC or hardware addresses to an interface range and VLANs by using the mac-
address-table static multicast-mac-address vlan vlan-id output-range interface
command.
612
— enables the UDP broadcast feature on an interface either
Interfaces