Protocol Spanning-Tree Pvst - Dell MXL 10GbE Reference Manual

Interface
Name
PortID
---------- -------- ---- ------ ----------- -------
-------------------- --------
Po 23 128.24
001e.c9f1.00f3 128.24
Te 5/41 128.450 128 2000 DIS
001e.c9f1.00f3 128.450
Te 5/50 128.459 128 2000 FWD
001e.c9f1.00f3 128.459
Interface
Name
Edge BpduFilter
---------- ------ -------- ---- ---- ---------
---- ----------
Po 23
No
Te 5/41 Dis
No
Te 5/50 Desg
No
Related

protocol spanning-tree pvst

Commands
protocol spanning-tree pvst
To enable PVST+ on a device, enter the PVST+ mode.
Syntax
protocol spanning-tree pvst
To disable PVST+, use the disable command.
Defaults none
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Example
Dell#conf
Dell(conf)#protocol spanning-tree pvst
Dell(conf-pvst)#no disable
Dell(conf-pvst)#vlan 2 bridge-priority 4096
Dell(conf-pvst)#vlan 3 bridge-priority 16384
Dell(conf-pvst)#
Dell(conf-pvst)#show config
!
protocol spanning-tree pvst
Dell#
1062
PortID Prio Cost
128 1600
Role PortID
Desg 128.24
128.450 128
128.459 128
Introduced on the MXL 10/40GbE Switch IO Module.
no disable
vlan 2 bridge-priority 4096
vlan 3 bridge-priority 16384
Designated
Sts Cost Bridge ID
FWD 0 32768
0 32768
0 32768
Prio Cost Sts Cost Link-type
128 1600 FWD 0
2000 DIS 0
2000 FWD 0
— enter SPANNING TREE mode on the switch.
Per-VLAN Spanning Tree Plus (PVST+)
P2P No
P2P No
P2P No