Table of Contents
Advertisement
When executing this command on the master, the stack reloads. When the
members are renumbered, only that specific unit is reset and comes up with the
new unit number.
Example
Dell#stack-unit 0 renumber 2
Renumbering master unit will reload the stack. Proceed to
renumber [confirm yes/
no]:
Related
•
Commands
•
•
Stacking
reload
— reboots the system.
redundancy disable-auto-reboot
show system
— displays the current status of all stack members or a specific
member.
— resets the designated stack member.
1263
Advertisement
Table of Contents
