Dell MXL 10GbE Reference Manual page 1193

kex key-
exchange-
algorithm
port port-
number
[version {1 | 2}]
Defaults Default listening port is 22.
Command CONFIGURATION
Modes
Command
Version 9.5(0.0)
History
Version 8.3.16.1
Usage This command enables the SSH server and begins listening on a port. If a port is
Information not specified, listening is on SSH default port 22.
Example
Dell# conf
Dell(conf)# ip ssh server port 45
Dell(conf)# ip ssh server enable
Dell#
Security
•
hmac-sha2-256
•
hmac-sha2-256-96
Enter the keyword kex and then a space-delimited list of key
exchange algorithms supported by the SSH server.
The following key exchange algorithms are available:
•
diffie-hellman-group-exchange-sha1
•
diffie-hellman-group1-sha1
•
diffie-hellman-group14-sha1
When FIPS is enabled, the default key-exchange-algorithm is
diffie-hellman-group14-sha1.
When FIPS is not enabled, the default key-exchange-
algorithms are the following:
•
diffie-hellman-group-exchange-sha1
•
diffie-hellman-group1-sha1,
•
diffie-hellman-group14-sha1
(OPTIONAL) Enter the keyword port then the port number
of the listening port of the SSH server. The range is from 1 to
65535. The default is 22.
(OPTIONAL) Enter the keyword version then the SSH
version 1 or 2 to specify only SSHv1 or SSHv2.
NOTE: If you enable FIPS mode, you can only select
version 2.
Introduced the cipher, kex and mac options on the MXL
10/40GbE Switch.
Introduced on the MXL 10/40GbE Switch IO Module.
NOTE: Starting with Dell Networking OS Release 9.2(0.0), SSH server is
enabled by default.
1193